个人简历：
黄雪飞，男，金沙集团3354CC副教授，博士研究生导师。2013年毕业于清华大学材料科学与工程专业，获工学博士学位。2015年在德国克劳斯塔尔工业大学短期访学。目前兼任四川省核学会核燃料与材料专委会委员，曾获得四川省金属学会第二届冶金先进青年科技工作者、四川大学“好未来”优秀学者奖、四川大学优秀硕士论文指导教师、“四川大学青年骨干教师奖励计划”等奖励。主讲本科生《材料科学基础》课程，研究生《材料相变》课程。
研究方向：
核反应堆结构材料、先进高强钢、镁合金等先进金属结构材料的
1. 固态相变及组织形成理论
2. 材料组织设计与性能调控
3. 材料组织的计算机模拟
4. 电子显微分析
研究介绍：
长期从事先进金属结构材料（核反应堆结构材料、先进高强钢、镁合金等）的微结构与性能关系的实验和理论研究。工作特点是开展材料在变形、热机械处理过程中组织演化的系统实验研究和理论模拟，建立组织形成理论，并进行材料组织和性能的深入关联性研究，以此指导材料的组织设计和性能调控。以第一作者或通讯作者在Corrosion Science、Journal of Nuclear Materials、Journal of Materials Science & Technology、Materials Science and Engineering: A、Metallurgical and Materials Transactions A等国际期刊上发表论文30余篇，获得国家授权发明专利4项。先后承担了国家自科学基金项目、国防项目、四川省重大专项项目子课题、四川大学科技领军人才培育项目等。
联系方式：
地 址： 四川省成都市一环路南一段24号金沙集团3354CC
E-mail ：x.f.huang.123@163.com
近五年代表性论文：
核能结构材料
[1] Hui Wang, Xiong Zhou, Hao He, Liping Guo, Yunxia Gao and Xuefei Huang. Development of low-Cr wrought FeCrAl cladding alloys and its irradiation tolerance and steam oxidation resistance at 1200 °C. Corrosion Science. 2022, 195: 109998.
[2] Li Chen, Hui Wang, Xuguang An and Xuefei Huang. Recovery, recrystallization and precipitation behavior in an ATF FeCrAl alloy during annealing treatment. Materials Characterization. 2022, 190: 112026.
[3] B. D. Wu, X. S. Yang, Y. Z. Zhou, X. Liu, J. F. Li, X. F. Huang and G. M. Le. Laser melting deposited self-passivating 90W-10Cr coatings on reduced activation ferritic/martensitic steel using 90W-7Ni-3Fe interlayers. Journal of Nuclear Materials. 2021, 553: 153029.
[4] Li Chen, Xuefei Huang, Kun He and Hui Wang. Precipitation behavior and age hardening effect of the precipitates in a Fe-13Cr-4Al-2Mo-1.2Nb alloy. Materials Characterization. 2021, 173: 110918.
[5] Hao He, Shuhai Huang, Hui Wang and Xuefei Huang. Isothermal holding processes of a reduced activation ferritic/martensitic steel to form a bainitic/martensitic multiphase microstructure and its mechanical properties. Materials Science and Engineering: A. 2021, 822: 141645.
[6] Hao He, Hui Wang, Kun He, Xue Liang and Xuefei Huang. Comparative study on the microstructure and mechanical properties of a modified 9Cr–2WVTa steel by normalizing-tempering and quenching-partitioning treatments. Materials Science and Engineering: A. 2021, 800: 140364.
[7] Xuefei Huang, Hui Wang, Shaoyu Qiu, Yiyong Zhang, Kun He and Boda Wu. Cold-rolling & annealing process for nuclear grade wrought FeCrAl cladding alloy to enhance the strength and ductility. Journal of Materials Processing Technology. 2020, 277: 116434.
[8] B. D. Wu, X. Liu, J. F. Li, Y. Z. Zhou, X. S. Yang, X. F. Huang and G. M. Le. Tungsten-chromium coatings on reduced activation ferritic/martensitic steels prepared by laser melting deposition process. Journal of Nuclear Materials. 2020, 152573.
先进高强钢
[1] Dingbo Sun, Shuhai Huang, Chongmu Chen, Hui Wang, Xuguang An, Qiangguo Li and Xuefei Huang. Enhancement of the Mechanical Properties of a V–Ti–N Microalloyed Steel Treated by a Novel Precipitation-Quenching & Partitioning Process. Metallurgical and Materials Transactions A. 2022.
[2] Dong Lang, Qiangguo Li, Xuefei Huang and Weigang Huang. Stacking fault energy and fcc→hcp transformation driving force in Fe-Mn-C-Cr-Si high manganese steels and experimental investigation. Materials Research Express. 2021, 8: 086507.
[3] E. Liu, Q. Li, S. Naseem, X. Huang and W. Huang. Effect of isothermal transformation times below Ms and tempering on strength and toughness of low-temperature bainite in 0.53 C bainitic steel. Materials. 2020, 13.
[4] Qiangguo Li, Xuefei Huang and Weigang Huang. Fatigue property and microstructure deformation behavior of multiphase microstructure in a medium-carbon bainite steel under rolling contact condition. International Journal of Fatigue. 2019, 125: 381-393.
[5] Qiangguo Li, Xuefei Huang and Weigang Huang. Strain hardening behavior and deformation characteristics of multiphase microstructure in a medium-carbon quenching and partitioning bainitic steel. Materials Science and Engineering: A. 2017, 707: 199-206.
[6] Xuefei Huang, Wenli Liu, Yuyin Huang, Hu Chen and Weigang Huang. Effect of a quenching-long partitioning treatment on the microstructure and mechanical properties of a 0.2 C% bainitic steel. Journal of Materials Processing Technology. 2015, 222: 181-187.
镁合金
[1] Xuefei Huang, Shuhai Huang, Zhengrong Li and Chuangwei Wang. On the coprecipitation crystallography in a Mg-7Sn-1Mn-2Ag-1Zn alloy. Journal of Alloys and Compounds. 2021, 892: 162153.
[2] Xuefei Huang, Baoqin Fu and Weigang Huang. Newly observed irrational crystallographic features of non-basal Mg2Sn precipitates in a Mg-4Sn alloy aged at 160 °C. Journal of Materials Science & Technology. 2021, 77: 237-243.
[3] Rui Feng, Xin Li, Xuefei Huang and Weigang Huang. Effect of Bi and Zn Additions on the Microstructures and Mechanical Properties of As-Cast Mg–7Sn–2Al-Based Alloys. Journal of Materials Engineering and Performance. 2022.
[4] Xuefei Huang, Li Chen and Hui Wang. Characterization and Interpretation of the Multiple Crystallographic Features of ε’ Precipitates in an Ag-Containing Mg-Sn Alloy. Metallurgical and Materials Transactions A. 2020，51A:2002-2010..
[5] Xuefei Huang and Weigang Huang. Irrational crystallography of the (1 1 -2 0)Mg Mg2Sn precipitates in an aged Mg-Sn-Mn alloy. Materials Characterization. 2019, 151: 260-266.
[6] Wandong Li, Xuefei Huang and Weigang Huang. Effects of Ca, Ag addition on the microstructure and age-hardening behavior of a Mg-7Sn (wt%) alloy. Materials Science and Engineering: A. 2017, 692: 75-80.
